Hear sounds from all around you with the Sound Blaster PCI64.
 Designed for the home user, gamer or multimedia enthusiast, you feel every explosion and experience each spine-tingling scream.
Using up to four speakers at once, this is the only way to get true 3D sound!

PCI bus for optimal performance
The Sound Blaster PCI64 utilizes the PCI bus, allowing it to use far less CPU overhead than traditional sound cards. This translates into higher frame rates in your games, more bandwidth for 3D audio and multi-channel support for upcoming game titles.

3D Audio Technology, 64-voice Wavetable Synthesis, & 4-speaker support
Creative's digital effects engine lets you enjoy customizable audio effects such as multi-algorithm reverb and chorus. With 8- and 16-bit mono and stereo recording and playback, and user-selectable sample rates from 5kHz to 48kHz, the Sound Blaster PCI64 produces precise audio fidelity and supports 16 MIDI channels, 128 GM & GS compatible instruments and 10 drum kits. You can also connect to 2- or 4-speakers for an engulfing 3D surround-sound experience.

We only have one of these available.

 

Full compatibility
Sound Blaster PCI64 is a snap to install with complete plug-and-play, Windows 95 and 98 compatibility. It accurately produces high fidelity sound in any audio or game application. And, with Sound Blaster PCI compatibility, you are assured support for the largest selection of existing MS-DOS^® and Windows-based titles. Full compatibility is exactly what you'll get from Creative, the leader in PC audio technology.

*Usage of this product in Windows NT® 4.0 requires a minimum 200MHz processor and 32MB system RAM.
 Functionality may differ from box specifications due to limitations in Windows NT® .
Bundled application and utility software may have higher system requirements

Hardware Specifications
Frequency Response: 30Hz - 20KHz (Line-out)	Signal to Noise Ratio: 90 db
Total Harmonic Distortion @ 1 Vrms (10 K Ohm load): 0.01%	Microphone Impedance: 600 Ohms
Supply Voltage Requirement (Loading): +5, +12, -12 Volt	Line-In Impedance: 47 K Ohms
Current Consumption (Typical): 250, 500, 50 mA respectively	CD Audio-In Impedance: 50 K Ohms
Sampling Rate for Playback/Recording (Stereo): 4 KHz - 48 KHz	Microphone Sensitivity: 10 - 200 mVpp
	Line-In Sensitivity: 0 - 2 Vpp
AD/DA Resolution: 16 bits	CD Audio-In Sensitivity: 0 - 2 Vpp
Environmental Specifications
Environment Temperature (non-operating): -40C to 70C	MTBF: >60,000 hours
Environment Temperature (operating): 10C to 50C	Relative Humidity (operating): 30% to 80%
Relative Humidity (non-operating): 30% to 95%	Vibration: Sine wave for X, Y and Z axis (non-operating) 5Hz to 15Hz : 0.76mm (P-P) 15Hz to 25Hz : 1.5G 25Hz to 50Hz : 0.15mm (P-P) 50Hz to 100Hz : 3G
Drop Test: 30cm above concrete ground on all 6 sides
Sound Blaster PCI64 Update for x86 Windows NT 4.0     E64-NTDRV-1-US
Location of Driver:  Click Here    as of 12/23/98	Driver: e64nt4u.exe  Revision: E64-NTDRV-1-US

Shipping and handling fee $15 standard USPS (mail)
This include boxing (not double) and postage.

Payment by credit card accepted through
We do not use Bilpoint

I prefer PayPal, the #1 payment service in online auctions!